Note: For complete details on how to program your vehicle, always refer to your the SCT owner's manual. If you have questions, contact your SCT dealer or call SCT customer support.
How to Tune Your Mustang using an SCT X3 Power Flash Programmer
By Jonathan Lamas, About.com Guide
10 of 10
Prev Next
Carefully Unplug the Tuner
Carefully unplug the unit from the OBD-II port beneath the dash.
Photo © Jonathan P. Lamas
You have now finished tuning your Mustang to run with the new cold air intake you installed. At this point you can unplug the SCT Programmer from the OBD-II port. Carefully unplug the unit, taking care not to damage the port or the plug.
Prev
- Overview
- Plug the Tuner Into the OBD-II Port
- Select Program Vehicle
- Install the Tune
- Select Pre-Programmed Tune
- Select Your Vehicle From the Menu
- Adjust the Options
- Adjust Air Box Setting
- Begin the Program
- Carefully Unplug the Tuner
Suggested Reading
Elsewhere on the Web
Explore Mustangs
Must Reads
About.com Special Features
How to Inspect a Used Car
Stay safe and save time by following these tips before driving a used car. More >
New and Redesigned Cars for 2010
Discover the hottest cars for the 2010 calendar year. More >
©2009 About.com, a part of The New York Times Company.
All rights reserved.